So I needed another roller stand and decided to build my own. However that was not the only goal of this project.
I wanted to come up with a design that would allow me to put a PVC roller anywhere and with any length I wanted.
I had it in the back of my mind for weeks and finally came up with this setup after scouring my local Home Depot and Lowe's.
I will mention that all I had to buy for this roller stand build were the casters and a length of 2" PVC. Everything else I had in the shop leftover from other projects. So cost was less than a standard roller stand($25 or so).
Again the main goal was to design a PVC roller build method to attach it to anything easily and with custom length to your needs.
I hope you enjoyed this build article. Check back for more and be sure to watch my video in the Vlog section.
Please post comments below and I will see you for the next Wood Time...